← Articles & Insights

Tech Rehearsal Expectations for Corporate Events

Written by Mollie Plotkin GroupUpdated
On this page

Every meeting planner knows a tech rehearsal is important.

The more useful question is: what actually needs to get done during it?

A good tech rehearsal is not just a quick microphone check. It is the point where the event team confirms that the run of show, presentations, microphones, video, audio and stage cues all work together before attendees enter the room.

For a conference, that often means rehearsing the day before the sessions take place.

Have the Run of Show Ready First

The tech rehearsal should not be the first time everyone sees the event sequence.

Before rehearsal begins, have the run of show, blocking and speaker order established.

The production team should know:

  • Who is coming onstage and when
  • What presentation or media accompanies them
  • What happens immediately before and after each segment

If there is an emcee, keynote speaker, panel, executive presentation or other main-stage segment, each should already have a place in the schedule.

Schedule the Tech Rehearsal Before the Event Day

For conferences and multi-day meetings, it is common to rehearse the next day’s main-stage programming in the conference room the day before.

That gives the production team time to resolve problems without putting pressure on the actual session schedule.

If the event starts Tuesday morning, for example, the main ballroom may be available Monday afternoon or evening for technical rehearsal.

Whenever possible, do not make the first complete technical check happen immediately before the doors open.

Check More Than the Keynote Speaker

The keynote may be the biggest presentation of the day, but they are not the only person who needs to be comfortable onstage.

Check in with the:

  • Keynote speaker
  • Emcee or host
  • Executives and other presenters

Make sure they understand the microphone setup, stage layout and how their presentation will be handled.

A speaker may prefer a handheld microphone while another wants a lavalier. The emcee may need to move on and off the stage repeatedly. Those details are much easier to resolve during rehearsal.

Test Every Presentation

The actual presentation files need to be tested on the equipment that will be used during the event.

Do not assume that because a PowerPoint opened correctly on someone’s laptop, it will automatically work correctly in the ballroom.

Run through the portions that matter most, including:

  • Slides
  • Embedded video
  • Embedded audio

Check that the presentation is formatted correctly on the event screens and that video playback is smooth.

If multiple speakers have decks, make sure the production team knows which file belongs to which session and that the final versions have been received.

Test Every Microphone

Every microphone that will be used should be checked.

That includes microphones for the keynote speaker, emcee, executives, panelists and audience Q&A if applicable.

Test the microphone from the actual stage rather than only from the AV table.

The speaker should be able to hear how the room responds and confirm that they are comfortable with the equipment they will use.

If there is a backup microphone, make sure the production team knows where it is and that it works.

Check the Room Sound

A microphone working does not necessarily mean the room sounds good.

Walk the space.

Make sure speech is clear throughout the room and that music, videos and other audio sources are at appropriate levels.

A ballroom may sound very different from the production desk than it does from the back row.

Run the Videos

If the event includes keynote videos, opening videos, sponsor content or other media, play them during rehearsal.

Confirm:

Video plays correctly.
Audio routes correctly.
The correct file is queued.

If a video is supposed to lead directly into a speaker entrance, rehearse that transition rather than testing the video by itself.

Rehearse Walk-On Music

Walk-on music is part of the cueing process.

If the keynote speaker or executive has requested specific entrance music, collect it before the rehearsal and make sure the production team has the correct file.

Then rehearse the sequence:

Introduction → Music cue → Speaker entrance → Music fade → Speaker begins

The same applies to walk-off music or music used between sessions.

These are small details, but they make the event feel much more polished when everyone knows the cue.

Check Stage Blocking

The tech rehearsal is also the time to confirm where people physically go.

Make sure the speaker knows:

  • Where they enter
  • Where they should stand or move
  • Where they exit

If there are confidence monitors, stage furniture, a podium or cameras, confirm how those affect the available space.

The emcee should also know where to wait between segments so transitions do not become awkward.

Rehearse the Important Transitions

You usually do not need every speaker to deliver their entire presentation during tech rehearsal.

What matters most is checking the portions where production is involved.

That might include:

TransitionWhat to Check
Intro → KeynoteMicrophone, walk-on music and entrance
Keynote → VideoSlide/video cue and audio
Presentation → Q&AMicrophone handoff or audience mic
Speaker → EmceeWalk-off cue and next entrance
Panel setupChairs, microphones and stage movement

The objective is to remove uncertainty at the moments where one part of the program hands off to another.

Confirm the Final Cueing With AV

At the end of rehearsal, the meeting planner and production team should be working from the same plan.

Confirm any important cues for:

  • Slides
  • Videos
  • Music
  • Microphones
  • Lighting
  • Speaker entrances and exits

If something changed during rehearsal, update the run of show rather than assuming everyone will remember it the next day.

What Should Be Finished Before Tech Rehearsal?

Ideally, the event should enter rehearsal with the major production pieces already collected.

Before RehearsalReady?
Run of show✓
Final speaker order✓
Presentation decks✓
Videos✓
Walk-on music✓
Microphone preferences✓
Stage layout✓

The rehearsal is there to test the plan, not invent the plan from scratch.

A Simple Tech Rehearsal Checklist

Before leaving the room, confirm:

  • Every presentation has been tested
  • Every video plays correctly
  • All microphones work
  • Room audio has been checked
  • Walk-on music is queued
  • Speaker entrances and exits are clear
  • Stage blocking is confirmed
  • Major transitions have been rehearsed
  • The run of show reflects any changes

The Goal Is to Remove Surprises

A tech rehearsal does not need to become a full performance of the entire conference.

It needs to answer the practical questions before the audience arrives.

Does the presentation work?

Can everyone hear the speaker?

Does the video play?

Is the right music queued?

Does the speaker know where to walk?

Does the production team know the next cue?

If those questions have already been answered, event day becomes much easier for the meeting planner, the AV team and everyone who has to step onstage.